Pharma-line Shell and Tube Heat Exchangers

The Pharma-line is a high-quality tubular heat exchanger designed to operate in the pharmaceutical and biotech industries. There are different executions available for different duties and demands. All Pharma-line products are designed in-line with regulations within this industry.
It is suitable for heating and cooling of products intended for the pharmaceutical industry, mainly water For Injection (WFI) and Purified Water (PW) and some non-viscous pharmaceutical products.

Benefits
• Designed with focus on hygienic demands
• Leak detection by double tube sheet design
• Q-doc as standard

Standard Design And Configuration
Standard design and configuration The Pharma-line double tube sheet shell & tube heat exchanger series is designed with a focus on the hygienic standards, performance and reliability to meet the pharmaceutical industries demands. The standard configuration of Pharma-line is a U-tube design that suits most applications. A U-tube design means less footprint needed, compared to a straight tubular heat exchanger. There are no dead areas in the Pharma-line, and it is fully drainable on the product side. The tubes used in the heat exchanger are seamless with smooth and controlled surface to minimize risk of contamination. All products wetted parts, the tube, chamber, product connections are made of high-quality stainless steel. The gasket in contact with the product is made of PTFE material which is FDA compliant and USP class VI certified.

PHARMA-LINE IS AVAILABLE IN 2 DIFFERENT PRODUCT RANGES:
Pharma-line S

• Standardized products with predefined options. Are available with pressure equipment certification, PED or Chinese TSG. The unit can either be non-insulated or insulated with mineral wood with stainless steel 304 cladding.
• Pharma-line S is equipped with movable legs to facilitate installation, the product can be installed either horizontally or vertically.

PHARMA-LINE P
Available with standard selection with several options to select among and as a complete customized design available upon request.

Options Pharma-line P
• Insulation mineral wool (ASTM C795) with stainless steel 304 cladding
• Removable tube bundle
• Passivation
• 1 pass, 2-pass, or 4-pass designs
• Connections standard and sizes
1. Product side: Clamp: ASME BPE, DIN32676, DIN11864, ISO2852
2. Utility side: Flanges: ANSI B16.5 (150lbs, 300 lbs), DIN2635/EN1092-1
• Pressure equipment certification, PED, ASME, TSG

DOCUMENTATION
All Pharma-line products are delivered along with Alfa Laval Q-doc including:
• Approved drawings
• welding procedures (WPS), welder qualification (WPQ), weld log
• 3.1 Material certificates, pressure & product wetted steel parts
• Gaskets FDA compliance and USP class VI certificates
• Liquid penetrant test report
• Dimensional control report
• Pressure test certificate signed by Notified body
• Identification (technical sign)
• Quality system certificate
• Declaration of compliance
• CE documents
• Instruction Manual